Q. How do you measure a Traffic Door?
A. Under Traffic Door Basics see "How to Measure Your Opening"
Q. What is a Traffic Door?
A. A traffic door is a double acting door that provides a barrier between two areas. This "barrier" can be visual, thermal, or both. "Double Acting" means that the door swings in either direction. Traffic doors are designed to be opened by impact. The type of traffic, the impact and the function that the door is to serve will help you to determine the product to be used.
Q. Is there another name for a Traffic Door?
A. Yes, the most common names are listed below: Impact Doors, Double Acting Doors, Bump Doors, Swinging Doors, Sheet Doors, Double Swinging Doors, Flexible Doors, Service Doors, and Industrial Doors
Q. How much is a Traffic Door?
A. Depending on the application, a traffic door for the same size opening can be as inexpensive as $200.00, or as high as $1,500.00.
Q. Why use a Traffic Door?
A. Traffic doors are an excellent choice for applications where a high volume of traffic exists and minimal infiltration is desired. Doors serve as a barrier. This barrier can be thermal, visual, sound, environmental, or secure.
Q. What should I consider when I purchase a Traffic Door?
A What is the opening Size? (Width and Height of Opening)
What type of traffic will be going through the door?
What is the opening size in relation to the product passing through the opening?
What is the traffic flow pattern going through the opening?
Will the door be subject to wash-down or chemicals?
Is the door being used for thermal separation?
What do you want the door to do?
- control temperature?
- visual barrier?
- hold up under abusive applications?
- provide a positive seal?
Q. Why does traffic flow matter?
A. The traffic flow pattern will:
Q. How wide of a load can go through the opening?
A. Rule of Thumb: An opening should be designed so that the maximum load that passes through the door is not more than 70% of the opening width.
Q. Are there options for when loads exceed 70% of the opening?
A. Yes, you can purchase a flexible traffic door, upgrade to a more durable door, provide swing limiting posts, or automate the door.
Q. What doors can motorized traffic go through?
A. Durulite Industrial Doors or our AirGard Flexible Doors.
Q. What are the jamb requirements?
A. Double Acting Doors are opened by "impact". Some of the force of this impact is transferred to the frame. The frame must be designed to accept this impact. Therefore, the following types of frames are available:
Q. What is a "Teardrop Bumper"?
A. Teardrop bumpers act as a "shock absorber" and protect the door panel from impact by forklifts, pallet jacks, and carts.
Q. What is the difference between a "C" hinge and "E" hinge?
A. The E-hinge provides a more finished look
Q. What is a Flexible Door?
A. A Flexible Door is a traffic door that utilizes a single hinge at the top of the door. The advantage that the flexible door offers is it's ability to handle abuse from traffic passing through the opening. There is no lower hinge on the door, and the panels will "flex" if wrapped around the corner, or if traffic passes partially through the opening and reverses direction.
Q. What are advantages to Flexible Doors?
A. Flexible doors allow loads nearly as wide as the opening to pass through the opening.
Q. What are disadvantages to Flexible Doors?
A. Flexible doors offer limited draft resistance, door will blow open if negative or positive pressure exists.
Q. How big should the rough opening be when using KD frames?
A. 4-1/2" wider and 2-3/8" higher than the finished opening.